GRAPHTEC CE8000 Series - Connecting Via Wireless LAN; Access Point Setting

9-3
9.2 Connecting via wireless LAN
Configure settings when connecting using wireless LAN.
* If the wireless LAN module is not installed, [ ] will be displayed on the menu and you will not be able to open the setting
items.
When connecting via wireless LAN, set the following items.
• Access point setting
• Entering the IP address
• Entering the subnet mask
• Gateway input
• DHCP setting
Access point setting
Access point settings depend on the network device configuration and your environment.
For details, please see your device's manual or consult your network administrator.
Operation
1. Press the [ ] icon.
2. Press the [CONFIG].
3. Press the [COMMUNICATION].
4. Press the [WIRELESS LAN] icon.
5. Press [WIRELESS LAN] to turn it to [ON].
To cancel, set it to [OFF].