2-35
[SHEET]
Select this when a sheet media has been loaded.
The width, leading edge, and trailing edge of the sheet media are detected.
2.
After the media is detected, the plotter is ready to receive data for cutting or plotting.
This status is called "READY status" of the default screen.
When setting is finished, the tool carriage's location will become the initial point.
•
When loading the media, the fan suction operates to assist in loading the media.
If you want to turn off this function, please refer to "10.3 Related to Plotter Environment".
•
The following screen will be displayed while media is being detected.
Supplement
To Next Page
Loading...
