GRAPHTEC CE8000 Series - Page 180

9-13
13. Press the [GATEWAY].
14. Press the separated numbers you want to set.
15. Enter the numbers you want to set and press the [OK].
16. Confirm the numbers and press the [OK].
If you want to change the numbers for other separated numbers, repeat steps 14 and 15.
Supplement
17. Press the [OK].
•
If you change the settings, the plotter will automatically restart and return to the HOME screen.
•
If you do not change any settings, proceed to step 18.
•
Press the [MAC ADDR.] button to display the MAC address.
Supplement
18. Press the [ ] icon.
It will return to HOME screen.