GRAPHTEC CE8000 Series - Page 179

9-12
6. Press the separated numbers you want to set.
7. Enter the numbers you want to set and press the [OK].
8. Confirm the numbers and press the [OK].
•
If you want to change the numbers for other separated numbers, repeat steps 6 and 7.
•
If the IP address is the same as the wireless LAN IP address, an error screen will be displayed.
Enter a different IP address from the wireless LAN.
Supplement
9. Press the [SUBNET MASK].
10. Press the separated numbers you want to set.
11. Enter the numbers you want to set and press the [OK].
12. Confirm the numbers and press the [OK].
If you want to change the numbers for other separated numbers, repeat steps 10 and 11.
Supplement