GRAPHTEC CE8000 Series - Page 148

7-12
7. Press the [CORRECTION VALUE X].
8. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
You can set the range between -2.00% and +2.00%.
Supplement
9. Confirm the setting and press the [OK].
10. Press the [CORRECTION VALUE Y].
11. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
You can set the range between -2.00% and +2.00%.
Supplement
12. Confirm the setting and press the [OK].
13. Press the [ ] icon.
14. Press the [ ] icon.
It will return to HOME screen.