10-6
6.
Press the [ENABLED], [INSIDE DISABLED] or [DISABLED] for the sensor.
•
"INSIDE DISABLED" is displayed for CE8000-130.
•
It will not generate error even if the inner push rollers are not on the grit rollers when the "INSIDE DISABLED"
is selected.
•
When "DISABLE" has been set, the home sensor position is not detected, so depending on the data, a
position error could occur. Please always set the “CUT AREA”.
Supplement
7.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
