2-52
7.
Press the [START].
The tool moves down/up and measures the height.
8.
Press the [TARGET].
9.
Specify the target value using the [ ] [ ] icon or the [ ] icon.
10.
Confirm the setting and press the [OK].
11.
Press the [CHECK].
The height is calculated by moving the tool up and down.
"T" is the target value of the blade length, and "H" is the current blade height (amount).
Turning the blade-length adjustment knob displays the number of turns and direction.
Supplement
12.
Turn the blade-length adjustment knob and adjust the cutter blade length.
Current blade length is displayed by pressing the [CHECK], so adjust the blade length until it matches the
thickness of the media.
Depending on the media type, the blade might sink in to the media, making accurate measurement
impossible.
13.
Press the [ ] icon twice.
It will return to HOME screen.
To Next Page
Loading...
