3-12
Stop cutting
Operation
1.
Press the [STOP] or the [ESCAPE] key.
2.
Press the [CANCEL JOB].
It will resume cutting by pressing the [RESUME JOB].
Supplement
3.
Confirm if the data transfer from the computer is stopped and press the [YES, CLEAR].
The buffer memory will be cleared and it will return to HOME screen.
•
If you press the [NO], you will return to the work interruption screen without clearing the buffer memory.
•
When clearing the buffer memory, be sure to make sure that data transfer has stopped.
If you clear the buffer memory while data is being transferred, processing will start from the middle of the
data, which may result in abnormal operation.
Supplement
To Next Page
Loading...
