Huawei Quidway S6500 Series User Manual

Operation Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 QoS Configuration
Huawei Technologies Proprietary
2-16
Operation Command Remarks
Define ACL
Advanced ACL:
rule [ rule-id ] { permit | deny }
protocol [ source { source-addr
wildcard | any } ] [ destination
{ dest-addr dest-mask | any } ]
[ source-port operator port1
[ port2 ] ] [ destination-port
operator port1 [ port2 ] ]
[ icmp-type type code ]
[ established ] [ [ precedence
precedence | tos tos ]* | dscp
dscp ] [ fragment ] [ time-range
name ]
Basic ACL:
rule [ rule-id ] { permit | deny }
[ source { source-addr wildcard |
any } | fragment | time-range
name ]*
Link layer ACL:
rule [ rule-id ] { permit | deny }
[ protocol-type | format-type | cos
cos | ingress { { source-vlan-id |
source-mac-addr }* | any } |
egress { dest-mac-addr | any } |
time-range name ]*
User-defined ACL:
rule [ rule-id ] { permit | deny }
{ rule-string rule-mask
offset }&<1-8> [ time-range
name ]
The commands defining the
ACL rules correspond to the
ACL types.
Exit to
system view
quit —
Enter
Ethernet port
view
interface { interface_type
interface_num | interface_name }
The prompt character in
Ethernet port view corresponds
to the Ethernet port you enter.
Enter QoS
view
qos
The prompt character in QoS
view corresponds to the
Ethernet port you enter.
Configure
traffic
policing
traffic-limit inbound
{ user-group { acl-number |
acl-name } [ rule rule ] |
{ ip-group { acl-number |
acl-name } [ rule rule ] |
link-group { acl-number |
acl-name } [ rule rule ] }* }
[ kbps ] target-rate [ exceed
action ]
—

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English