Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-11
Table 4-15 Sending the Information to monitor terminal
Device Configuration Default value
Configuration
description
Enable info-center
By default,
info-center is
enabled.
Other configurations are
valid only if the info-center
is enabled.
Set the information
output direction to
monitor
- -
Set information source -
You can define which
modules and information to
be sent out and the
time-stamp format of
information, and so on. You
must turn on the switch of
the corresponding module
before defining output
debugging information.
Switch
Enable the terminal
display function and
this function for the
corresponding
information
-
For Telnet terminal and
dumb terminal, to view the
information, you must
enable the current terminal
display function using the
terminal monitor
command.
5) Sending the Information to log buffer.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English