Huawei Quidway S6500 Series User Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-12
Table 4-16 Sending the Information to log buffer
Device Configuration Default value
Configuration
description
Enable info-center
By default,
info-center is
enabled.
Other configurations are
valid only if the info-center
is enabled.
Set the information
output direction to
logbuffer
-
You can configure the size
of the log buffer at the same
time.
Switch
Set information
source
-
You can define which
modules and information to
be sent out and the
time-stamp format of
information, and so on. You
must turn on the switch of
the corresponding module
before defining output
debugging information.
6) Sending the Information to trap buffer.
Table 4-17 Sending the Information to trap buffer
Device Configuration Default value
Configuration
description
Enable info-center
By default,
info-center is
enabled.
Other configurations are
valid only if the info-center
is enabled.
Set the information
output direction to
trapbuffer
-
You can configure the size
of the trap buffer at the
same time.
Switch
Set information
source
-
You can define which
modules and information to
be sent out and the
time-stamp format of
information, and so on.
You must turn on the
switch of the
corresponding module
before defining output
debugging information.
7) Sending the Information to SNMP

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English