Kyocera TASKalfa 6501i - Page 18

2N8/2N7
1-1-2
Output tray
capacity
Lower left
tray
275 sheets (64 g/m
2
)
250 sheets (80 g/m
2
)
Upper left
tray
110 sheets (64 g/m
2
)
100 sheets (80 g/m
2
)
Right tray
70 sheets (64 g/m
2
)
70 sheets (80 g/m
2
)
Light source LED
Scanning system Flat bed scanning by CCD image sensor
Photoconductor a-Si (drum diameter 40 mm)
Image write system Semiconductor laser
Charging system Charger roller
Developing system
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container and toner hopper
Transfer system Belt + roller
Separation system Small diameter separation, Separation electrode
Cleaning system
Drum: Counter blade, Cleaning roller
Transfer belt: Fur brush
Charge erasing system Exposure by cleaning lamp (LED)
Fusing system
Single-axle belt support fusing system
Heat source: IH (belt), Halogen heater (press roller)
Abnormally high temperature protection devices: thermostat
CPU Freescale QorIQ P1022 (Dual Core) 1067MHz
Memory 3GB
Hard Disk 160 GB or more
Interface
Standard
USB Interface Connector: 1 (USB Hi-Speed)
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T)
USB Port: 4 (Hi-Speed USB)
Option
Fax (e-KUIO): 2
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T)
A maximum of two interface options can be installed.
Only one network interface can be installed.
When a network interface is installed, only one fax line can be installed.
Operating
environment
Temperature 10 to 32.5 °C/ 50 to 90.5 °F
Humidity 15 to 80% RH
Altitude 2,500 m/ 8,202 ft or less
Brightness 1,500 lux or less
Dimensions
(W × D × H)
Machine
only
1039 × 801 × 1347 mm
40 57/64 × 31 17/32 × 53 1/64”
Space required (W × D)
1039 × 801 mm (using MP tray)
40 57/64 × 31 17/32” (using MP tray)
Item
Specifications
65 ppm 80 ppm