Kyocera TASKalfa 6501i - Set RTC (Real Time Clock) Date; Setting the USB Host Lock Function

2N8/2N7
1-3-110
U209 Set RTC (Real Time Clock) Date
Description
Assign a date and time to RTC.
Purpose
Used to assign a date and time to RTC when “Time for Maintenance T” is displayed after C0840
is detected.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the +/- keys.
4. Press the start key. The value is set.
* : Perform U906 to clear “Time for Maintenance T" after making setting.
U221 Setting the USB host lock function
Description
Specifies ON/OFF the USB host lock function. Setting this to ON causes the machine to be
unable to recognize the device connected to the USB host.
Purpose
Set according to the preference of the user.
Method
1. Press the start key.
2. Select [Host Lock].
3. Select On or Off.
Initial setting: Off
4. Press the start key. The setting is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Item No. Description
Display Description
Year Setting the year
Month Setting the month
Day Setting the day
Hour Setting the hour
Minute Setting the minute
Second Setting the second
Display Description
On USB host lock function ON
Off USB host lock function OFF