2N8/2N7
1-3-205
U989 HDD Scan disk
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is performed, the control information in the
hard disk drive may be damaged. Use this mode to restore the data.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U990 Checking the time for the exposure lamp to light
Description
Displays the accumulated time for the CIS to light.
Purpose
To check duration of use of the CIS.
Method
1. Press the start key.
The accumulated time for the CIS to light is displayed in minutes.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U991 Checking the scanner operation count
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
1. Press the start key. The current operation counts is displayed.
Completion
Press the stop key. The screen for selecting a maintenance No. item is displayed.
Item No. Description
Display Description
CIS The accumulated time for the CIS to light
Display Description
Copy Scan Scanner operation counts for copying
Fax Scan Scanner operation counts for fax
Other Scan Scanner operation counts except for copying
To Next Page
Loading...
