2N8/2N7
1-3-199
U952 Maintenance mode workflow
Description
The maintenance modes configured in the machine or a USB flash device as a workflow must be
executed in succession.
Purpose
This allows maintenance mode to be preset as a template.
Setting
1. Press the start key.
2. Select the item.
Method: [Execute]
1. Select [Execute].
2. Select the workflow.
* : The machine is preset with the following workflow at shipment.
3. Press the start key.
Executes maintenance modes defined in a workflow in succession.
Item No. Description
Display Description
Continue Restarting an abandoned workflow
Execute(USB) Executes a workflow housed in a USB flash device
Execute Executes a workflow stored in the machine
Entry(USB) Exports a workflow housed in a USB flash device to the machine
Entry Assigns a workflow in the machine manually
Log Displays a list of workflows recently executed
Display Description
SETUP U464/ U410/ U000/ U927/ U278
WARRANTY U089/ U000
MK-A U119/ U140/ U127/ U464/ U412/ U464/ U410/ U251
MK-C U464/ U410/ U251
EH SETUP U034/ U246
Data6 -
Data7 -
Data8 -
To Next Page
