Kyocera TASKalfa 6501i - Setting the Presence or Absence of a Key Card or Key Counter

2N8/2N7
1-3-105
U204 Setting the presence or absence of a key card or key counter
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Device]
1. Select the optional counter to be installed.
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [Message]
1. Select the [Key Device] or [Coin Vender].
* : Initial setting: Coin Vender
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Item No. Description
Display Description
Device Sets the presence or absence of the key card or key counter
Message Sets the message when optional equipment is not installed
Display Description
Key-Card The key card is installed
Key-Counter The key counter is installed
Off Not installed
Display Description
Key Device Select the prioritized display mode of the login dialog as the
key device.
Coin Vender Select the coin vender as the prioritized display of the login
dialog.