2N8/2N7
2-1-3
(2) Large capacity feeder
The paper feeder is comprised of the right- and left-hand cassettes and their feeding units, and the paper
feeding section for the left-hand cassette.
The paper loaded on the lifting plate in the right-hand cassette is picked up to the PF forwarding pulley, PF
feeding pulley, and PF separator pulley, one by one; then the PF feed roller 1 drives the paper into the device.
The paper fed by the left-hand cassette is separated in the similar manner and guided by the driving roller into
the device.
Right cassette section
Figure 2-1-3 Right cassette section
13
14 15
16
6
7
13
12
3
10
11
14
2 17
4
5
8
9
1
1. PF forwarding pulley
2. PF paper feed pulley
3. PF separation pulley
4. PF feed roller 1
5. PF feed pulley
6. PF size detection switch 1 (PFSDSW1)
7. PF cassette detection switch 1 (PFCDSW1)
8. PF paper gauge sensor 1 upper (PFPGS1(U))
9. PF paper gauge sensor 1 lower (PFPGS1(L))
10. PF paper sensor 1 (PFPS1)
11. PF lift sensor 1 (PFLS1)
12. PF feed sensor 1 (PFFS1)
13. PF paper conveying roller
14. PF paper conveying pulley
15. PF paper conveying sensor 2 (PFPCS2)
16. PF paper conveying unit switch (PFPCUSW)
17. PF paper conveying cover switch
(PFPCCSW)
To Next Page
