2N8/2N7
1-3-95
U167 Checking the fuser count
Description
Displays the fuser count for checking.
Purpose
To check the fuser count or drive time after replacement of the fuser unit.
Method
1. Press the start key. The fuser count is displayed.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
U169 Checking/setting the fuser power source
Description
Displays and settings the reference voltage of the fuser IH PWB.
Purpose
To check the reference voltage.
* : When U021 is being executed, set the same voltage with the voltage of the IH control
PWB.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Set Fuser]
1: 100 V specifications 2: 200 V specifications 3: 120 V specifications
4: 110 V specifications
3. Press the start key. The setting is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Cnt Fuser unit count value
Release(Time) Fuser unit drive time (release)
Press(Time) Fuser unit drive time (press)
Display Description
Set Fuser Destination setting for Fuser
Display Description Setting range
Mode Reference voltage 1 to 4
To Next Page
Loading...
