Kyocera TASKalfa 6501i - Installing the Key Counter (Option); Supplied Parts of Key Counter Set; Supplied Parts of Tray Mount Set

2N8/2N7-1
1-2-35
1-2-3 Installing the key counter (option)
Key counter installation requires the following parts:
*: Not used in 120V model.
Supplied parts of key counter set (302A369709):
*: Not used in this model.
Supplied parts of tray mount set (302LF94291):
Parts Quantity Part.No.
Key counter 1 3025418011
Key counter set 1 302A369709
Key counter wire* 1 302K946AJ0
Tray mount set 1 302LF94291
Parts Quantity Part.No.
Key counter socket assembly 1 3029236241
Key counter cover retainer 1 302GR03010
Key counter retainer 1 302GR03020
Key counter cover 1 3066060011
Key counter mount 1 3066060041
Edging 2* 7YZM210006++H01
Band 1* M21AH010
M3 x 8 tap-tight P screw 1* 5MBTPB3008PW++R
M4 x 10 tap-tight P screw 2* 5MBTPB4010PW++R
M4 x 10 tap-tight S screw 2* 5MBTPB4010TW++R
M3 x 6 bronze flat-head screw 2 7BB003306H
M4 x 20 tap-tight S screw 2* 7BB100420H
M3 nut 1 7BC1003055++H01
M3 x 8 bronze binding screw 1* B1B03080
M4 x 30 tap-tight S screw 1* B1B54300
M4 x 6 chrome TP screw 5 B4A04060
M4 x 10 chrome TP screw 2* B4A04100
Parts Quantity Part.No.
Tray cover 1 302LC04600
Tray mount 1 -
Tray film 2 -
M4 x 20 tap-tight S screw 4 7BB100420H
M4 x 8 tap-tight S screw 2 7BB700408H