Kyocera TASKalfa 6501i - Detaching and Refitting the ISU Front Cover, ISU Right Cover and ISU Rear Cover

2N8/2N7
1-5-11
3. Remove three screws.
4. Unhook six hooks and then remove the
left upper cover.
Figure 1-5-17
(11)Detaching and refitting the ISU front cover, ISU right cover and ISU rear cover
Procedure
1. Remove the document processor.
2. Remove two screws and then remove
the ISU front cover.
3. Remove two screws and then remove
the ISU right cover.
Figure 1-5-18
Screws
Left upper
cover
ISU front cover
Screws
Screws
ISU right cover