Kyocera TASKalfa 6501i - Setting the Adjustment of the Motor Speed

2N8/2N7
1-3-45
U053 Setting the adjustment of the motor speed
Description
Perform fine adjustment of the speeds of the motors.
Purpose
Basically, the setting need not be changed. Modify settings by interlock setting only if faulty
images occur.
Method
1. Press the start key.
2. Select the item to be adjusted
Setting: [Motor1]
1. Select the item to be adjusted.
Setting: [Motor2]
1. Select the item to be adjusted.
Item No. Description
Display Description
Motor1 Adjustment of drum motor speeds
Motor2 Adjustment of developer motor, registration motor and transfer motor
speeds
Motor3
Adjustment of eject motor, fuser motor, BR decurler motor, BR conveying
motor 1/2, paper feed motor, JS eject motor, middle motor and duplex
motor 1/2 speeds
Motor1 Half Adjustment of drum motor speeds in half speed
Motor2 Half Adjustment of developer motor, registration motor and transfer motor
speeds in half speed
Motor3 Half Adjustment of eject motor, fuser motor
, BR decurler motor , BR conveying
motor 1/2, paper feed motor, JS eject motor, middle motor and duplex
motor 1/2 speeds in half speed
Display Description
Setting
range
Initial setting
65ppm 80ppm
Drum(K) Drum motor (DRM) -5000 to 5000 0 0
Display Description
Setting
range
Initial setting
65ppm 80ppm
Dev(K) Developer motor (DEVM) -5000 to 5000 813 639
Regist Registration motor (RM) -5000 to 5000 32 25
Sep Belt Transfer motor (TRM) -5000 to 5000 14 11