2N8/2N7
1-3-136
U265 Setting OEM purchaser code
Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main PWB and the like.
Setting
1. Press the start key.
2. Change the setting value using the numeric keys.
3. Press the start key. The setting is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U271 Setting the page count
Description
Banner counting
Purpose
To change when modifying counting Banner
* : If U253 is adjusted to double-counting, the value which is multiplied with this value will be
the count value.
Setting
1. Press the start key.
2. Select the item.
3. Change the setting value using the +/- keys or numeric keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting
range
Initial
setting
Banner A Counting for Banner A (470.1mm to
915mm/18.51” to 36”)
2 to 30 2
Banner B Counting for Banner B (915.1mm to
1,220mm/36.01” to 48”)
2 to 30 3
To Next Page
