2N8/2N7
1-3-131
U247 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U249 Finisher operation test
Description
Perform operating tests on the 4000-sheet finisher.
Purpose
To check the operation of the 4000-sheet finisher.
Method
1. Press the start key.
2. Select the item.
3. Press the start key.
4. Press the system menu key to make a test copy.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Punch Position Check the stop position of punching
Booklet Pass Check the paper paths to the center-folding unit
To Next Page
Loading...
