Kyocera TASKalfa 6501i - Page 730

2N8/2N7
1-5-118
12. Remove the stop ring from the DP origi-
nal feed belt shaft B.
13. Pull out the DP original feed belt shaft B
from the DP original feed belt unit.
14. Remove the DP feed collar B and DP
original feed belt from the DP original
feed belt shaft B.
Figure 1-5-193
15. Remove the stop ring from the DP for-
warding pulley shaft.
16. Pull out the DP forwarding pulley shaft
from the DP original feed unit and then
remove the DP forwarding pulley.
17. Check or replace the DP original feed
belt and DP forwarding pulley and refit
all the removed parts.
Figure 1-5-194
DP original feed
belt shaft B
DP original feed
belt unit
DP original feed
collar B
DP original feed belt
Stop ring
DP forwarding
pulley
DP forwarding
pulley shaft
DP original
feed unit
Stop ring
Bush
Pulley