Kyocera TASKalfa 6501i - Page 882

2N8/2N7
2-3-74
YC13
1 3.3V2 I 3.3 V DC 3.3 V DC power from RYPWB
Connected to
feed PWB 1
2 LOOP_SENS O 0/3.3 V DC LPS: On/Off
3 EDGE_FAN_REM I 0/24 V DC FUFM: On/Off
4 DU1_A I 0/24 V DC (pulse) DUM1 drive control signal
5 DU1_B I 0/24 V DC (pulse) DUM1 drive control signal
6 DU1_A/ I 0/24 V DC (pulse) DUM1 drive control signal
7 DU1_B/ I 0/24 V DC (pulse) DUM1 drive control signal
8 GND - - Ground
9 DU_CL_UPPER_R
EM
I 0/24 V DC DUCL1: On/Off
10 24V2 I 24 V DC 24 V DC power from FPWB1
11 EXIT_FAN I 0/24 V DC EFM: On/Off
12 DU_ENTER_SENS O 0/3.3 V DC DUS1: On/Off
YC16
1 DU1_B/ O 0/24 V DC (pulse) DUM1 drive control signal
Connected to
duplex motor
1 and Fuser
fan motor 1,2
2 DU1_A/ O 0/24 V DC (pulse) DUM1 drive control signal
3 DU1_B O 0/24 V DC (pulse) DUM1 drive control signal
4 DU1_A O 0/24 V DC (pulse) DUM1 drive control signal
5 EDGE_FAN_REM O 0/24 V DC FUFM1: On/Off
6 24V2 O 24 V DC 24 V DC power to FUFM1
7 EDGE_FAN_REM O 0/24 V DC FUFM2: On/Off
8 24V2 O 24 V DC 24 V DC power to FUFM2
Connector Pin Signal I/O Voltage Description