Diagnostic aids 3-7
7525-63x
Sensor Test See “Sensor Test” on page 3-20.
BASE SENSOR TEST
Front Door See “BASE SENSOR TEST” on page 3-20.
Standard Bin
Narrow Media
Input - S1
Input - S2
Fuser Exit
C TMC Sensor
M TMC Sensor
Y TMC Sensor
K TMC Sensor
DEVICE TESTS
Quick Disk Test See “Quick Disk Test” on page 3-21.
Disk Test/Clean See “Disk Test/Clean” on page 3-21.
PRINTER SETUP
Defaults See “Defaults” on page 3-21.
Prt Color Pg Count See “Prt Color Pg Count, Prt Mono Pg Count and Perm Page Count”
on page 3-22.
Prt Mono Pg Count
Perm Page Count
Serial Number See “Serial Number” on page 3-22.
Engine Setting 1 See “Engine Setting 1 through 4” on page 3-22.
Engine Setting 2
Engine Setting 3
Engine Setting 4
Model Name See “Model Name” on page 3-22.
Configuration ID See “Configuration ID” on page 3-22.
Reset Maintenance Counter See “Reset Maintenance Counter” on page 3-23.
ITU Barcode See “ITU Barcode” on page 3-23.
Reset Fuser Cnt See “Reset Fuser Cnt” on page 3-23.
EP SETUP
EP Defaults See “EP Defaults” on page 3-23.
Fuser Temp See “Fuser Temp” on page 3-24.
DC Charge Adjust See “DC Charge Adjust, Dev Bias Adj, Transfer Adjust” on page 3-24.
Dev Bias Adj
Transfer Adjust
TPS SETUP
Right See “Right or Left TPS” on page 3-24.
Left
Cal Ref Adj See “Cal Ref Adj” on page 3-24.
Reset Color Cal See “Reset Color Cal” on page 3-24.
REPORTS
Menu Settings Page See “Menu Settings Page” on page 3-25.
To Next Page
Loading...
Need help?
General
