3-10 Service Manual
7525-63x
Skew
One printhead houses the four color planes. The black plane is aligned to the printer, and the other color planes
are internally aligned to black. Electronic alignment fine tunes the alignment of the color planes to the black
plane once the printhead is installed. See “Alignment Menu” on page 3-11 for instructions on setting printhead
alignment. This must be performed before color skew adjustment is attempted. The following illustration shows
proper alignment versus skewed alignment.
Quick Test
The Quick Test contains the following information:
• Print registration settings
• Alignment diamonds at the left, right, top, and bottom
• Horizontal lines to check for skew
• General printer information, including current page count, installed memory, serial number, and code level
To print the Quick Test page:
Note: Print the Quick Test Page on Letter or A4 paper.
1. Navigate to REGISTRATION > Quick Test.
2. Quick Test Printing… appears, and the page prints. Retain this page to determine the changes you need
to make to the margin settings. Once the Quick Test Page completes printing, the display returns to
REGISTRATION.
To Next Page
Loading...
Need help?
General
