Lexmark X548 Series - Digital Imaging Specifications; General Specifications; ADF Scan Speed; ADF Document Handling

1-16 Service Manual
7525-63x
Go Back
Previous
Next
Digital imaging specifications
General specifications
ADF scan speed
•
Simplex ADF—Up to 5 ppm
• Duplex ADF—Up to 5 ppm (page sides)
ADF document handling
•
ADF input capacity—50 sheets
• ADF output capacity—50 sheets
• ADF document width—4.9 in. (125 mm) to 8.5 in. (216 mm)
• ADF document length—5 in. (127 mm) to 14.0 in. (356 mm)
Resolution and color depth
•
Resolution—1200 dpi optical
• CDD 1200 dpi, and 600 dpi—Selectable through electronics
• Color depth—48 bit RGB output, 16 bit / channel
Flatbed document specifications
•
Document size—Up to A4 and letter
4.5” x 5.5” to 8.5”x11” (SEF)
Flatbed speed
3 seconds to scan, 3 seconds to return
Scanner operating environments
•
Temperature—10°–35°C
• Humidity—15%–85%RH
Storage environments
•
Temperature— -20–43°C
• Humidity—5%–95%RH
Tilt
This device should operate within the stated parameters when it is level within 10 mm from front to back and
10 mm side to side.