Diagnostic aids 3-33
7525-63x
Reset Separator Roll and Pick Assembly Counter
To reset the counter:
1. Navigate to Reset Separator Roll and Pick Assembly Counter.
2. Touch Reset Separator Roll and Pick Assembly Counter to reset the counter.
3. Resetting appears, and the display returns to Reset Separator Roll and Pick Assembly Counter.
USB Scan to Local
USB Scan to Local enumerates a USB simple device or USB composite device. In the off position, the simple
USB device is enumerated: in the on position, the composite USB device is enumerated.
To change this setting:
1. Navigate to USB Scan to Local.
2. Touch or to change the setting.
3. Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
Print Quality Pages
The Print Quality Pages can be printed from both the Configuration Menu and the Diagnostics Menu. The
Configuration Menu is limited in information compared to the pages printed from the Diagnostics Menu.
To print the pages:
1. Navigate to Print Quality Pages.
2. Printing Quality Test Pages appears, and the pages print.
The Print Quality Test Pages contain several pages. The first page which is printed in English text contains only
a mixture of text and graphics. The information includes values of the Quality Menu settings in Settings and
printer and toner cartridge configuration information. The remaining pages contain only graphics. For samples of
the pages, see “Print Quality Pages” on page 3-16.
Reports
Menu Settings Page
Print the menu settings pages to list the customer settings and to verify printer options are installed correctly. It
is helpful to print the customer settings before you restore factory defaults or make major changes.
To print the menu settings:
1. Navigate to Reports > Menu Settings Page.
2. Printing Menu Settings Page appears, and the pages print.
To Next Page
Loading...
Need help?
General
