Diagnostic information 2-13
7525-63x
Service error messages
Error code Description Action
1xx.xx service errors
106.xx Service
Yellow Printhead
Yellow printhead error. Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.01 Service
Yellow Printhead
The yellow printhead lost HSYNC. Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.02 Service
Yellow Printhead
The yellow printhead failed to complete
servo.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.03 Service
Yellow Printhead
The yellow printhead mirror motors
failed to achieve lock.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.04 Service
Yellow Printhead
The yellow printhead mirror motors lost
PLL motor lock.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.05 Service
Yellow Printhead
Failure reading NVRAM from printhead Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.08 Service
Yellow Printhead
The yellow laser showed bad in EMS
testing.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.11Service
Yellow Printhead
Failure writing data to printhead Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.12 Service
Yellow Printhead
Failure reading data from the printhead Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
106.13 Service
Yellow Printhead
Printhead declared error Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.xx Cyan
Printhead Error
Cyan printhead error Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.01 Service
Cyan Printhead
The cyan printhead lost HSYNC. Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.02 Service
Cyan Printhead
The cyan printhead failed to complete
servo.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.03 Service
Cyan Printhead
The cyan printhead mirror motors failed
to achieve lock.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.04 Service
Cyan Printhead
The cyan printhead mirror motors lost
PLL motor lock.
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.
107.05 Service
Cyan Printhead
Failure reading NVRAM from the cyan
printhead
Perform a POR. If the problem persists, go
to “Printhead service check” on
page 2-54.