EasyManuals Logo

Lexmark X548 Series Service Manual

Lexmark X548 Series
347 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Diagnostic aids 3-35
7525-63x
Go Back
Previous
Next
PPDS Emulation
The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS data
stream. The current value of this setting appears in parentheses to the right of the setting on the Configuration
Menu screen.
The following table indicates how the value of this setting affects the user default value for the SmartSwitch and
Printer Language settings:
To change this setting:
1. Navigate to PPDS Emulation.
2. Touch or to change the setting.
3. Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
changes.
Factory Defaults
Sets the majority of printer values back to their factory default settings.
Warning: This selection cannot be reversed, so this operation should be used only as a last resort to fix any
printer problem. When factory default settings are restored:
All downloaded resources (fonts, macros, symbol sets) in the printer memory (RAM) are deleted.
All menu settings return to the factory default setting except:
The Display Language setting in the Setup Menu.
All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, Local Talk Menu, and
USB Menu.
It is recommended to view current settings by printing the Menu Settings pages. Customer settings are available
from the Ready prompt, Diagnostics Menu settings are available in the Diag Menu, and Configuration Menu
settings are available in the Configuration Menu.
1. Turn off the printer, or select Exit Config Menu.
2. At the home screen, touch .
3. Navigate to Reports > Menu Settings Page.
4. Print the Menu Settings pages from the Diagnostics Menu. See “Menu Settings Page” on page 3-25.
5. Turn off the printer, or select Exit Diags.
6. Print the Menu Settings pages from the Configuration Menu. See “Menu Settings Page” on page 3-33.
Value of PPDS
Emulation setting
Resulting value of
SmartSwitch setting (all
ports)
Resulting value for Printer Language
settings
Activate Off PPDS Emulation
Note: You can still switch languages on the
operator panel or through the PJL ENTER
LANGUAGE command.
Deactivate On Printer's factory default value

Table of Contents

Other manuals for Lexmark X548 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark X548 Series and is the answer not in the manual?

Lexmark X548 Series Specifications

General IconGeneral
BrandLexmark
ModelX548 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals