3-12 Service Manual
7525-63x
4. Select the best choice for fine or coarse adjustment in Step 1 (first page), and add it to the current value for
the Top Margin.
5. Use the or of the Top Margin setting to enter the sum of the numbers, and touch Submit.
Submitting changes appears, and the display returns to the Alignment Menu.
Print the Quick Test again to verify if the observed value is the same as the current value (no change is
needed). If change is still needed, repeat steps 4–5. When the observed values and the current value are
the same, continue to the next step.
To Next Page
Loading...
