I-2 Service Manual
7525-63x
reception 2-68
transmission 2-67
fax specifications 1-18
flatbed
installation
4-82
removal 4-75
flatbed home position service check 2-61
flatbed motor service check 2-61
flatbed pivot link, removal 4-85
front door sensor service check 2-36
fuser assembly
removal
4-32
service check 2-38
fuser drive motor assembly, removal 4-36
fuser exit sensor
removal
4-37
service check 2-37
G
general information 1-1
H
high voltage power supply, removal 4-40
I
image transfer unit, removal 4-43
imaging unit (IU), removal 4-63
L
left scanner cover, removal 4-94
lithium battery, warning ii-xvii
locations 5-1
low voltage power supply, removal 4-48
lower frame, removal
left
4-50
right 4-53
lubrication specifications 6-2
M
main drive gear assembly with motors, removal 4-57
media handling 1-9
menu (users), map 3-4
messages, attendance 2-5
models 1-1
modem service check 2-66
O
operator panel
buttons
3-1
service check 2-41
option trays, service check 2-57
options and features 1-1
output bin tray, removal 4-108
P
paper jams
avoiding
3-45
locations 3-46
paper, specifications 1-10
parts catalog 7-1
covers 7-3
electronics 7-11, 7-13
media drawers and trays 7-15
operator panel 7-7
options 7-16
paperpath 7-9
scanner 7-5
pick tires-integrated 250 sheet media tray, removal 4-60
POR sequence 2-1
power-on reset sequence
see POR sequence
preventive maintenance
6-1
print quality service checks 2-45
print quality symptoms 2-4
printhead
service check
2-54
printhead, removal 4-61
product specifications 1-2
R
rear shield, removal 4-7
redirve unit, removal 4-93
removals
ACM-standard tray
4-13
ADF cable 4-89
ADF input tray 4-88
ADF separator pad 4-91
ADF separator roll 4-92
AIO link 4-97
AIO release lever 4-96
AIO toner cover 4-98
bin full flag 4-99
bin full sensor 4-16
covers
AIO back cable cover
4-8
right cover 4-7
scanner left 4-94
scanner right 4-94
top cover 4-9
developer unit 4-47
duplex ADF 4-87
duplex ADF rear cover 4-86
duplex sensor 4-29
flatbed 4-75, 4-82
flatbed pivot link 4-85
front cover assembly 4-3
front middle cover 4-4
fuser 4-32
fuser drive motor assembly 4-36
fuser exit sensor 4-37
high voltage power supply 4-40
image transfer unit 4-43
imaging unit (IU) 4-63
LCD 4-100
left cover 4-4
left lower frame 4-50
left scanner cover 4-94
low voltage power supply 4-48
main drive gear assembly with motors 4-57
operator panel assembly 4-102
operator panel bezel 4-104