Gocator Line Profile Sensors: User Manual
Gocator Device Files • 486
Element Type Description
0 – Default
100 – Nine Lines
PatternSequenceType.optio
ns
32s List of available pattern sequence types.
PatternSequenceType.used
Bool Whether or not this field is used.
PatternSequenceCount 32u Number of frames in the active sequence (read-only).
ExposureMode 32s
Exposure mode:
0 – Single exposure
1 – Multiple exposures
2 – Dynamic exposure
ExposureMode.options 32s (CSV) List of available exposure modes.
Exposure 64f Single exposure (µs).
Exposure.min 64f Minimum exposure (µs).
Exposure.max 64f Maximum exposure (µs).
Exposure.used Bool Whether or not this field is used.
DynamicExposureMin 64f Dynamic exposure range minimum (µs).
DynamicExposureMax 64f Dynamic exposure range maximum (µs).
ExposureSteps 64f (CSV) Mutiple exposure list (µs).
ExposureSteps.countMin 32u Minimum number of exposure steps.
ExposureSteps.countMax 32u Maximum number of exposure steps.
IntensitySource 32s Intensity source:
0 – Both cameras
1 – Front camera
2 – Back camera
IntensitySource.options 32s (CSV) List of available intensity sources.
IntensityMode 32s
Intensity Mode:
0 – Auto
1 - Preserve
IntensityMode.used Bool Whether intensity mode is used
ZSubsampling 32u Subsampling factor in Z.
ZSubsampling.options 32u (CSV) List of available subsampling factors in Z.
SpacingInterval 64f Uniform spacing interval (mm).
SpacingInterval.min 64f Minimum spacing interval (mm).
SpacingInterval.max 64f Maximum spacing interval (mm).
SpacingInterval.used Bool Whether or not field is used.
SpacingInterval value 64f Actual value used.
To Next Page
Loading...
Need help?
General
