NETGEAR M4200

MLD
639
Managed Switches
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/1 and 1/0/24 check boxes.
c. In the PVID (1 to 4093) field, enter 300.
d. Click Apply to save the settings.
4. Enable MLD snooping on the switch.
a. Select Routing > Multicast > MLD Snooping > Configuration.
A screen similar to the following displays.
b. For MLD Snooping Admin Mode, select the Enable radio button.
c. Click Apply.
5. Enable MLD snooping on the VLAN 300.
a. Select Routing > Multicast > MLD Snooping > MLD VLAN Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the VLAN ID field, enter 300.
• In the Admin Mode field, select Enable.
6. Click Add.