NETGEAR M4200

MVR
294
Managed Switches
Web Interface: Configure MVR in Compatible Mode
1. Create MVLAN 999, VLAN1 1001, VLAN2 1002 and VLAN3 1003.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 999, and in the VLAN Name field, enter mVlan.
c. Click Add.
d. Repeat step b and c to create VLAN1 1001, VLAN2 1002, and VLAN3 1003.
2. Add port 9 into MVLAN 999 with tagged mode.
a. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID list, select 999.
c. Click Unit 1. The ports display.
d. Click the gray box under port 9 until T displays. The T specifies that the egress
packet is tagged for the ports.
e. Click Apply to save the settings.
f. Repeat steps from b to e, add port 0/1 to VLAN1 1001, add port 0/5 to VLAN2 1002,
and add port 0/7 to VLAN3 1003.