NETGEAR M4200

SNTP
398
Managed Switches
Web Interface: Set the Named SNTP Server
1. Configure the SNTP server.
a. Select System > Management > Time > SNTP Server Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the Server Type list, select DNS.
• In the Address field, enter time-f.netgear.com
• In the Port field, enter 123.
• In the Priority field, enter 1.
• In the Version field, enter 4.
c. Click Add.
2. Configure the DNS server.
a. Select System > Management > DNS > DNS Configuration.
A screen similar to the following displays.