NETGEAR M4200 User Manual

DHCPv6 Server
474
Managed Switches
Figure 50. DHCPv6 stateful IPv6 address assignment
CLI: Configure DHCPv6 Prefix Delegation
1. Enable IPv6 routing.
2. Create a DHCPv6 pool and enable DHCP service.
(Netgear Switch) #configure
(NETGEAR SWITCH) (Config)#ip routing
(NETGEAR SWITCH) (Config)#ipv6 unicast routing
(NETGEAR SWITCH) (Config)#service dhcpv6
(NETGEAR SWITCH) (Config)#ipv6 dhcp pool pool1
(NETGEAR SWITCH) (Config dhcp6 pool)#domain name netgear.com
(NETGEAR SWITCH) (Config dhcp6s pool)#prefix delegation 2001:1::/64
00:01:00:01:15:40:14:4f:00:00:00:4d:aa:d0
(NETGEAR SWITCH) (Config dhcp6s pool)#exit
Switch functioning as PE router
CPE router
User’s network
2001:1:1::/96
User’s network
2001:1:2::/96
2001:1::/64
PE router: Provider edge router
CPE router: Customer premise equipment

NETGEAR M4200 Specifications

General

Brand	NETGEAR
Model	M4200
Category	Switch
Language	English