MVR
297
Managed Switches
A screen similar to the following displays.
b. In the Group IP list, select 224.1.2.3.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 1, 5, and 7. (Port 9 is already in MVR group
224.1.2.3 because it is configured as the source port.)
e. Click Apply to save the settings.
Configure MVR in Dynamic Mode
CLI: Configure MVR in Dynamic Mode
In dynamic mode, the MVR switch learns existing multicast groups by snooping the IGMP
queries from router on source ports and forwarding the IGMP reports from the hosts to the
IGMP router on the Multicast VLAN (with appropriate translation of the VLAN ID).
1. Create MVLAN, VLAN1, VLAN2, and VLAN3.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 999,1001, 1002, 1003
(Netgear Switch) (Vlan)#vlan name 999 mVlan
(Netgear Switch) (Vlan)#vlan name 1001 Vlan1
(Netgear Switch) (Vlan)#vlan name 1002 Vlan2
(Netgear Switch) (Vlan)#vlan name 1003 Vlan3
(Netgear Switch) (Vlan)#exit
To Next Page
Loading...
