NETGEAR M4200

Security Management
307
Managed Switches
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/1 check box.
Now 1/0/1 appears in the Interface field at the top.
c. Enter the following information:
• In the Port Security field, select Enable.
• In the Max Allowed Dynamically Learned MAC field, enter 10.
• In the Max Allowed Statically Locked MAC field, enter 3.
d. Click Apply to save the settings.
Convert the Dynamic Address Learned from 1/0/1 to a
Static Address
The example is shown as CLI commands and as a web interface procedure.
CLI: Convert the Dynamic Address Learned from 1/0/1 to the
Static Address
(Netgear Switch)(Interface 1/0/1)#port-security mac-address move
Convert the dynamic address learned from 1/0/1 to the static address
(Netgear Switch)(Interface 1/0/1)#exit
(Netgear Switch)(Config)#exit
(Netgear Switch)#show port-security static 1/0/1
Number of static MAC addresses configured: 3
Statically configured MAC Address VLAN ID
---------------------------------------------
00:0E:45:30:15:F3 1
00:13:46:EC:2F:62 1
00:14:6C:E8:81:23 1