Tools
402
Managed Switches
Web Interface: Traceroute
1. Select Maintenance > Troubleshooting > Traceroute.
A screen similar to the following displays.
Use this screen to specify that the switch must discover the routes that packets actually
take when traveling to their destination through the network on a hop-by-hop basis. Once
you click the Apply button, the switch sends three traceroute packets to each hop and the
results are displayed in the result table.
2. In the IP Address/Hostname field, enter 216.109.118.74.
3. Click the Apply button.
Your settings are saved.
Configuration Scripting
This section provides the following examples:
• script Command
• script list Command and script delete Command
• script apply running-config.scr Command
• Create a Configuration Script
• Upload a Configuration Script
Configuration scripting:
• Allows you to generate text-formatted files.
• Provides scripts that can be uploaded and downloaded to the system.
• Provides flexibility to create command configuration scripts.
• Can be applied to several switches.
• Can save up to 10 scripts or 500 K of memory.
• Provides script format of one CLI command per line.
To Next Page
Loading...
Need help?
General