NETGEAR M4200

DiffServ
250
Managed Switches
Web Interface: Diffserv for VoIP
1. Set queue 5 on all interfaces to use strict mode.
a. Select QoS > CoS > Advanced > CoS Interface Configuration.
A screen similar to the following displays.
b. Under Interface Queue Configuration, select all the interfaces.
c. In the Queue ID list, select 5.
d. In the Scheduler Type list, select Strict.
e. Click Apply to save the settings.
2. Enable DiffServ.
a. Select QoS > DiffServ > Basic > DiffServ Configuration.
A screen similar to the following displays.
b. For Diffserv Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
3. Create a class class_voip.
a. Select QoS > DiffServ > Advanced > DiffServ Configuration.