NETGEAR M4200 User Manual

Captive Portals
671
Managed Switches
The following table indicates the RADIUS attributes that are used to configure captive portal
users. The table indicates both RADIUS attributes and vendor specific attributes (VSA) that
are used to configure captive portal. VSAs are denoted in the ID column and are comma
delimited (vendor ID, attribute ID).
CLI: Configure RADIUS as the Verification Mode
Table 4. RADIUS Attributes for Configuring Captive Portal Users
RADIUS Attribute No. Description Range Usage Default
User-Name 1 User name to be authorized. 1–32 characters Required None
User-Password 2 User password. 8–64 characters Required None
Session-Timeout 27 Logout once session timeout is
reached (seconds). If the attribute is
0 or not present, use the value
configured for the captive portal.
Integer
(seconds)
Optional 0
Idle-Timeout 28 Log out once idle timeout is reached
(seconds). If the attribute is 0 or not
present, use the value configured for
the captive portal.
Integer
(seconds)
Optional 0
WISPr-Max-Band
width-Up
14122, 7 Maximum client transmit rate (b/s).
Limits the bandwidth at which the
client can send data into the network.
If the attribute is 0 or not present, use
the value configured for the captive
portal.
Integer Optional 0
WISPr-Max-Band
width-Down
14122, 8 Maximum client receive rate (b/s).
Limits the bandwidth at which the
client can receive data from the
network. If the attribute is 0 or not
present, use the value configured for
the captive portal.
Integer Optional 0
(Netgear Switch) (Config-CP 1)#radius-auth-server Default-RADIUS-Server
(Netgear Switch) (Config-CP 1)#verification radius

NETGEAR M4200 Specifications

General

Brand	NETGEAR
Model	M4200
Category	Switch
Language	English