NETGEAR M4200

DHCP Server
470
Managed Switches
Web Interface: Configure a DHCP Server that Assigns a Fixed IP
Address
1. Select System > Services > DHCP Server > DHCP Server Configuration.
A screen similar to the following displays.
2. For Admin Mode, select the Enable radio button.
3. Click Apply to enable the DHCP service.
4. Select System > Services > DHCP Server > DHCP Pool Configuration.
A screen similar to the following displays.
5. Under DHCP Pool Configuration, enter the following information:
• In the Pool Name list, select Create.
• In the Pool Name field, enter pool_manual.
• In the Type of Binding list, select Manual.
• In the Client Name field, enter dhcpclient.
• In the Hardware Address field, enter 00:01:02:03:04:05.