Switch Stacks
444
Managed Switches
b. Scroll down and select the 1/0/28 check box.
c. In the Configured Stack Mode menu, select Stack.
d. Click Apply to save the settings.
4. Reboot the switch.
a. Select Maintenance > Reset > Device Reboot.
A screen similar to the following displays.
b. In the Reboot Unit No. menu, select 1.
c. Click Apply.
The switch reboots.
Add, Remove, or Replace a Stack Member
You can manage an operating stack.
Add Switches to an Operating Stack
To add new switches to an operating stack:
1. Make sure that the redundant stack connection is functional.
All stack members must be connected in a logical ring.
To Next Page
Loading...
