NETGEAR M4200

VLANs
49
Managed Switches
Web Interface: Configure GVRP on switch A
1. On Switch A, create VLANs 1000, 2000, and 3000:
a. Select Switching > VLAN > Advanced > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 1000.
c. Click Add.
d. Repeat Step a through Step c to create VLANs 2000 and 3000.
2. Add port 1/0/24 as a tagged port to VLANs 1000, 2000, and 3000:
a. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
a. From the VLAN ID menu, select 1000.
b. Click Unit 1.
The ports display.
c. Click the gray box under port 24 until T displays.