EasyManua.ls Logo

NETGEAR M4200

NETGEAR M4200
688 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DHCPv6 Server
475
Managed Switches
3. Enable DHCPv6 service on port 1/0/9.
4. Show DHCPv6 binding.
Web Interface: Configure DHCPv6 Prefix Delegation
1. Enable IP routing globally.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Enable IPv6 unicast globally.
a. Select Routing > IPv6 > Basic > Global Configuration.
(NETGEAR SWITCH) (Config)#interface 1/0/9
(NETGEAR SWITCH) (Interface 1/0/9)#routing
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 address 2001:1::1/64
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 enable
(NETGEAR SWITCH) (Interface 1/0/9)#ipv6 dhcp server pool1 preference 20
(NETGEAR SWITCH) (Interface 1/0/9)#exit
(NETGEAR SWITCH) #show ipv6 dhcp binding
Client Address................................. FE80::200:FF:FE4D:AAD0
Client Interface............................... 1/0/9
Client DUID....................................
00:01:00:01:15:40:14:4f:00:00:00:4d:aa:d0
Identity Association ID........................ 5090000
Binding Prefix Address/Length.................. 2001:1::/64
Binding Prefix Type ........................... IA_PD
Binding Expiration (secs)...................... 4294967284
Binding Prefix Valid Lifetime (secs)........... infinite
Binding Prefix Preferred Lifetime (secs)....... infinite

Table of Contents

Related product manuals