SNMP
456
Managed Switches
Web Interface: Configure SNMPv3
1. Change the user password.
If you set the authentication mode to MD5, you must make the length of password longer
than 8 characters.
a. Select Security > Management Security > User Configuration > User
Management.
A screen similar to the following displays.
b. Under User Management, scroll down and select the User Name admin check box.
Now admin appears in the User Name field at the top.
c. In the Password field, enter 12345678.
d. In the Confirm Password field, enter 12345678.
e. Click Apply to save the settings.
2. Configure the SNMP V3 user.
a. Select System > Management > User Configuration.
A screen similar to the following displays.
b. In the User Name field, select the admin.
c. For Authentication Protocol, select the MD5 radio button.
d. For Encryption Protocol, select the DES radio button.
e. In the Encryption Key field, enter 12345678.
f. Click Apply to save the settings.
To Next Page
Loading...
