MVR
300
Managed Switches
7. After port 0/1 receive IGMP report for Multicast Group 224.1.2.3, it will be added to the MVR
Group 224.1.2.3.
Web Interface: Configure MVR in Dynamic Mode
1. Create MVLAN 999, VLAN1 1001, VLAN2 1002, and VLAN3 1003.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 999, and in the VLAN Name field, enter mVlan.
c. Click Add.
d. Repeat step b and c to create VLAN1 1001, VLAN2 1002, and VLAN3 1003.
e. Add port 9 into MVLAN 999 with tagged mode.
f. Select Switching > VLAN > Advanced > VLAN Membership.
(Netgear Switch) #show mvr members
MVR Group IP Status Members
--------------- --------------- ----------------------------------
224.1.2.3 ACTIVE 0/1(d)
To Next Page
Loading...
