NETGEAR M4200

MVR
301
Managed Switches
A screen similar to the following displays.
g. In the VLAN ID list, select 999.
h. Click Unit 1. The ports display.
i. Click the gray boxes under port 9 until T displays. The T specifies that the egress
packet is tagged for the ports.
j. Click Apply to save the settings.
k. Repeat steps from b to e, add port 0/1 to VLAN1 1001, add port 0/5 to VLAN2 1002,
and add port 0/7 to VLAN3 1003.
2. Enable MVR and multicast VLAN.
a. Select Switching > MVR > Basic > MVR Configuration.
A screen similar to the following displays.
b. From the MVR Running list, select Enable.
c. In the MVR Multicast Vlan field, enter 999.
d. From the MVR mode list, select dynamic.
e. Click Apply.